- Glove Box Chamber:
- Case Material: Made of 11 gauge (3mm thickness) 304 stainless steel sheet with sport frame, which provide heavy duty structure for vacuum
- Dimensions: 555mm(L) x 444mm(W) x 414mm(H)
- Max. Positive Pressure: 810 Torr (1.1 atm)
- Note: Gloves cannot work if pressure is higher than 810 Torr
- Max. Vacuum Level: 0.5 Torr
- Note: Stainless Steel case may deform at higher vacuum level
- Leakage Rate in GloveBox: < 6 Torr/hour
- Air-Lock Chamber:
- Dimensions: 200mm(ID) x 270mm(L)
- Max. Vacuum Level: 0.05 Torr
Vacuum Gauge and valves
Two vacuum flanges are included for glove box to achieve vacuum to remove moisture and oxygen without expensive insert gas purging
Do Not operate under vacuum status. Vacuum process is used for purging the glove box chamber before operation
One KF-25 connector is installed in the back for connecting humidity monitor or other testing equipment
Power Extenstion
One extension socket (Max power 1500W) is installed in the glove box main chamber.
Note: 110V power cord was included for immediate use.
Warranty:
One year limited warranty with lifetime support