1. High voltage power supply device:
0~50KV, digital display, over-current & over-voltage protection. Output power<25W.

2-channel pump: Each channel can be controlled independently for individual syringe. It is designed for continual infusion for electrospinning. Easy to use. Digital display. Flow rate, volume and time of infusion can be controlled precisely. Compatible with high voltage.

Rotating collector(150-6000rpm)
3.1 Drum, 1pc. D=100mm, L=235mm;
3.2 Disk collector, 1pc, D=140mm.

4. Plate collector with holder，1pc, 100mm*100mm.

5. Spinnerets with various holders.
5.1 Single needle with holder
5.2 Coaxial spinneret: Coaxial spinneret can produce Hollow nanofibers/microfibers, Core/Sheath nanofibers/microfibers. Using the coaxial electro-spinning method, different characteristics from each polymer can be combined into one fiber.
5.3 Side by side nozzle
5.4 Multi-nozzle, 1pc: 5, 7 or 9 nozzle as linear or 2-dimensional array.

6. Light source: Special designed light source, LED, cold light source, very useful for observing the spinning process by naked eyes.

7. Exhaust fan.
This device is equipped to cool down the equipment in working process, and help the solvent vaporization. Press the ventilation button on the control panel to start working. This device is equipped to cool down the equipment in working process, and help the solvent vaporization. Press the ventilation button on the control panel to start working.

8. Safety Measures: Emergency Stop Button; Door safety lock. (The high voltage power will be shut down automatically when door opened. ); Static removing system.

9. Heater
The syringe pump should be put outside when heater is using, otherwise, the syring pump will be damaged. The best working temp. is 45~50 degree C. Please increase the temp. slowly when heating. In winter, heater is quite useful for solvent volatilization.

10. Slide unit for spinnerets

11. Syringe & soft tube
Plastic syringe: 100 Nos
Needle: 100 Nos
PTFE tubing with PP lure lock connector: 30 Nos
PTFE tubing with PEEK lure lock connector: 30m

12. Other accessories.
13. Note: Grounding equipment should be prepared by the user. Specifications and design are subject to change without notice.